# Stair Concrete Calculator - Metric

We have included three concrete volume calculators for simple straight concrete stairs to help you in estimating the amount of concrete needed for your project.

- Calculator one will calculate the volume for stairs on a slope between two grades.
- Calculator two can be used for free standing stairs that require an upper landing and sides made of concrete.
- This calculator can be used for free standing hollow concrete stairs that require one or two of the sides to be made of solid concrete in addition to an upper landing.

### Concrete Calculator for Stairs - Metric

To calculate the amount of concrete needed with this calculator for stairs, you need to know the rise, run, throat depth, and the width of the stairs.

The throat depth of the stairs is measured from the point where the rise and run cuts meet on the inside cut, to the compacted gravel, or inside form, below. As a standard the minimum throat thickness should be at least 152 mm.

### Concrete Calculator for Stairs with Landing (solid)- Metric

This is not a very efficient way of building concrete stairs. I can see someone building stairs this way with 2 steps, but for more steps you would be better off building an inside box to limit the amount of concrete needed.

To use this calculator you need the enter the number of steps and include the landing as one of the steps. Enter the rise and run in millimeters, the width of the stairs and the desired length of your landing in millimeters.

### Concrete Calculator for Stairs with Landing and Wall- Metric

For this type of stairs you would build an inside form to reduce the amount of concrete needed.

Enter the total amount of steps needed as the amount of actual steps and don't include the landing as a step. Then enter the rise, run and throat depth in millimeters. Width of stairs and length of landing need to be entered in meters. For number of walls you need to enter either a "1" or a "2" and the thickness of the wall in millimeters.

### When Ordering Concrete

This concrete calculator will help you in estimating the amount of concrete needed for your project. The amount given as needed, does not include any waste. It is recommended, depending on the job you are doing, to add anywhere from an extra 4% to 10% to your concrete order to make sure you have enough concrete to finish the job. Ask when ordering the concrete. They will be able to give you a good idea of what is needed.##### Imperial

Complete FoundationColumns

Column + Pad

Footings

Footing + Wall

Foundation Wall

Pads

Rectangle Post + Pad

Slabs

Stairs

Stairs - Round

##### Metric

Complete FoundationColumns

Column + Pad

Footings

Footing + Wall

Foundation Wall

Pads

Rectangle Post + Pad

Slabs

Stairs

Stairs - Round

##### Shapes using Imperial & Metric Measurements

CircleDonut

Equilateral Triangle

Octagon

Oval

Pentagon

Scalene Triangle

Trapazoid

Plastic Concrete Footing Form