# Fuel Consumption for Operating a Machine

Calculate the amount of fuel and cost used at the end of the day.

It is assumed that at the start of the day the machine is filled up with fuel and is refilled at the end of the day. If a job takes multiple days and more than one re fill you will have to combine the amounts.

#### The Calculator

- Enter the number of hours the machine has operated at the start of the job
- Enter the number of hours the machine has worked at the end of the job
- Enter the amount of fuel needed to fill up at the end of the job
- Cost of fuel per Gallon/Litre

#### The Results

- Number of hours worked
- Fuel consumption per hour
- Average cost of fuel used per hour for this job
- Total cost of fuel used for this job

### Excavation Calculators

##### Imperial

Number of TruckloadsFuel Consumption for Operating a Machine

Shrink and Load Factor

Spike's Compaction Factor

Swell and Load Factor

Swell and Shrinkage of Excavated Materials

Calculate the Volume of a Pile in Cubic Yards

Calculate the Volume of a Pile in Cubic Yards - Cone Shaped

##### Metric

Number of Truckloads (Metric Measurements)Calculate the Volume of a Pile in Cubic Metres

Calculate the Volume of a Pile in Cubic Metres - Cone Shaped

##### Information

Bulking/Swell Factors for Various Excavated/Mined Materials##### New

- Elevation Grade from a Percentage
- Elevation Grade from Inches per Foot
- Elevation Grade Slope in a Percentage, Millimetres
- Horizontal Length from Angle and Slope Length
- Grade Percentage to Angle in Degrees
- Vertical Depth from a Slope Percentage and Horizontal Length
- Amount of Material from a Rectangle Shaped Excavation