Instructions

1. Enter the length of the building. (feet+inches)
2. Enter the width of the building. (feet+inches)
3. Enter the overhang of the eaves. (inches)
4. Enter the pitch of the upper roof: (rise /12")
5. Enter the pitch of the lower roof: (rise /12")
6. Enter the length of the lower roof. (feet+inches)

Results

For the steep lower section of the roof the square feet, roof pitch in degrees and slope percentage
For the upper roof the square feet, roof pitch in degrees and slope percentage.
The length of the four hips/ridges of the lower roof section for capping in lineal feet