Cube Tank/Container - Millimetres

Calculate the volume and the capacity of a cube tank or container. In a cube-shaped tank, all the edges are the same length.

This calculator uses millimetres for measurements.

Approximate weight of Fuel or Water

one litre of water = 1 kilogram
one litre of diesel fuel = 0.832 kilogram
one litre of gas = 0.75 kilogram

Calculator

1. enter the length of a side in millimetres
2. the weight of the liquid in kilograms per litre

Results

1. the volume of the cube in cubic millimetres
2. the volume in cubic metres
3. the volume in cubic inches
4. the volume in cubic feet
5. the capacity of the cube in millilitres
6. the capacity in litres
7. the capacity in US gallons
8. the capacity in Imperial gallons
9. full tank liquid weight based on kilograms/L
10. the surface area of the cube in square millimetres
11. surface area in square metres
12. surface area in square inches
13. surface area in square feet

Formula

V = E³
where V is the volume of the tank
E the length of an edge of the cube

Conversions
one cubic millimetre (mm³) = 0.000000001 cubic metres (m³)
one cubic millimetre (mm³) = 0.0000000353146667214886 cubic feet (ft³)
one cubic millimetre (mm³) = 0.0000610237440947323 cubic inches (in³)
one cubic millimetre (mm³) = 0.001 millilitres (ml)
one cubic millimetre (mm³) = 0.000001 litres (L)
one cubic millimetre (mm³) = 0.000000264172052358148 gallons (gal) US
one cubic millimetre (mm³) = 0.000000219969248299088 gallons (gal) Imperial
one square millimetre (mm²) = 0.000001 square metres (m²)
one square millimetre (mm²) = 0.0015500031000062 square inches (in²)
one square millimetre (mm²) = 0.0000107639104167097 square feet (ft²)