Spike's Calculators

Calculate the inner and outer surface area of a pipe. With this calculator, you can calculate both surface areas of a pipe from the inside and outside diameter of the pipe using inches for pipe diameter and the length of the pipe in feet.

- enter the inside diameter of the pipe in inches
- the outside diameter of the pipe in inches
- the length of the pipe in feet
- number of digits after the decimal point

- the pipe's wall thickness in inches
- the wall thickness in millimetres
- the inner circumference of the pipe in inches
- the inner circumference of the pipe in millimetres
- the inner surface area of the pipe in square inches
- the inner surface area in square feet
- the inner surface area in square metres
- the outer surface area of the pipe in square inches
- the outer surface area in square feet
- the outer surface area in square metres

C = 2πR

S = D*π*L where C is the circumference π = 3.14159265 R the radius of the pipe where S is the surface area in square units D the pipe's diameter L the length of the pipe

one inch (in) = 25.4 millimetres (mm) one square inch (in²) = 0.00694444444444443 square feet (ft²) one square inch (in²)= 6.4516 square centimetres (cm²) one square inch (in²) = 0.00064516 square metres (m²)

- Bend Radius and Angle
- Curved Pipe Volume
- Internal Angle from the Bend Radius
- Pipe Bend Radius Calculated from an Angle
- Pipe Volume from Curve Length and Height
- Pipe Volume

- Pipe Inner and Outer Surface Area - Inches
- Pipe Inner and Outer Surface Area - Millimetres
- Pipe Surface Area - from a Circumference in Inches
- Pipe Surface Area - from a Circumference in Metres
- Pipe Surface Area - from a Circumference in Millimetres
- Pipe Surface Area from Diameter - Decimal Inch
- Pipe Surface Area - From Diameter in Inches + Fraction