Shed Roof Sheathing Calculator - Metric

The Metric Roof Sheathing Calculator is designed to help you accurately determine the amount of plywood required to cover a shed roof using metric measurements. This calculator is tailored for those involved in construction, roofing projects, or DIY tasks requiring precise material estimates.



Shed Roof Sheathing Calculator

Shed Roof Sheathing (Metric) Calculator

Building Length A m
Building Length B m
Side Overhang mm
Front Overhang mm
Rear Overhang mm
Roof Angle °
Waste Percentage %

Results:

Roof Area
Estimated Plywood Needed #
Waste Factor adds #
Plywood Needed Including Waste #

Instructions

  1. building length A in metres
  2. the width of the building, length B, in metres
  3. side overhang in millimetres
  4. the overhang at the front of the roof in millimetres
  5. the overhang at the rear of the roof in millimetres
  6. the angle of the roof in degrees
  7. enter the percentage of material waste anticipated

The Results

  1. the area of the roof in square meters
  2. number of plywood sheets required (calculated using a standard sheet size of 2440mm x 1220mm)
  3. additional sheets required to account for waste
  4. total number of sheets needed, including waste


This tool is essential for builders and DIY enthusiasts aiming for efficiency and accuracy in material planning. Ensure you measure your shed dimensions accurately to get the best results.

If you have any questions or comments please Contact Us
Privacy Policy
© 1998, VmNet.