Spike's Calculators

Scalene Triangle Concrete Calculator

Calculator For Scalene Triangle Spike VM

A Scalene Triangle is a triangle shape where all three sides have different lengths, and none of the angles are equal.

To calculate the volume of a Scalene triangle-shaped slab, you will have to enter the lengths of all three sides and the required depth of the slab.

Note: using measurements where the combined length of two sides is smaller or equal to the length of the third side will result in an error!

Scalene Triangle Volume Calculator - Imperial

Side A Length:   ft  in.
Side B Length:   ft  in.
Side C Length:   ft  in.
Depth:   in.
Area:   ft ²
Perimeter:   lin ft

Amount of concrete needed:

Cubic Feet:   ft ³
Cubic Yards:   yd ³
Cubic Meters:   m ³


  1. enter the length of side A in feet and inches
  2. the length of side B in feet and inches
  3. the length of side C in feet and inches
  4. the slab thickness (depth) in inches


  1. the area of the slab in square feet
  2. the perimeter of the slab in lineal feet for forming material
  3. the amount of concrete needed in cubic feet
  4. in cubic yards
  5. in cubic metres

When Ordering Concrete

This concrete calculator will help you in estimating the amount of concrete needed for your project. The amount given as needed, does not include any waste. It is recommended, depending on the job you are doing, to add anywhere from an extra 4% to 10% to your concrete order to make sure you have enough concrete to finish the job. Ask when ordering the concrete. They will be able to give you a good idea of what is needed.
If you have any questions or comments please Contact Us
Privacy Policy
© 1998, VmNet.